Diode LED LINAIRE® Flex 3D Bend — Flexible Architectural Linear Light, 24V

The Diode LED LINAIRE® Flex 3D Bend is a flexible architectural linear light engineered to bend in all directions — top and side — to follow curves, contours, and custom shapes no rigid fixture can match. With a 0.79" × 0.79" square profile, full diffusion for a completely dotless look, and IP65/IP67 water resistance, it delivers precision light quality in indoor and outdoor applications where flexibility, durability, and aesthetics are all non-negotiable.

Available in two output tiers — 2.6W/ft (24V-3D-LIN, up to 176 lm/ft, 32.8ft max run) and 4.57W/ft (24V-3D-LIN4, up to 434 lm/ft, 16.4ft max run) — across five CCT options from 2400K to 4000K. UV stabilized for outdoor use, 90+ CRI, free-cut termination (cut anywhere), and backed by a 5-Year Limited Warranty with UL Listed 2108 certification.

Output by CCT

• 2400K: 151 lm/ft (2.6W/ft) | 379 lm/ft (4.57W/ft)
• 2700K: 159 lm/ft (2.6W/ft) | 411 lm/ft (4.57W/ft)
• 3000K: 165 lm/ft (2.6W/ft) | 421 lm/ft (4.57W/ft)
• 3500K: 167 lm/ft (2.6W/ft) | 430 lm/ft (4.57W/ft)
• 4000K: 176 lm/ft (2.6W/ft) | 434 lm/ft (4.57W/ft)

Best Applications

• Curved cove and soffit lighting with custom radius bends
• Organic architectural shapes, arches, and feature walls
• Outdoor wet location lighting — facades, pergolas, covered patios
• Under-cabinet and millwork profiles requiring top and side bends
• Hospitality, retail, and commercial installations with complex geometries
• Any application where a rigid linear fixture cannot follow the design intent

Key Features

• 3D Flex — Bends Top & Side: Flexible in both directions for maximum installation versatility. Follows curves, arches, corners, and custom architectural shapes without cuts or joints.
• Full Diffusion — Dotless Output: Built-in diffuser delivers uniform, dot-free illumination across the entire run — no visible LED chips, no hotspots, no accessories required.
• IP65 (Field Cut) / IP67 (Factory Assembly): Water resistant and UV stabilized for indoor and outdoor wet location use. Factory-assembled ends are rated IP67; field-cut terminations are IP65.
• Free Cut — Cut Anywhere: No fixed cut points — trim to any length needed for exact-fit installations. 96 in. white bare lead 18/2 AWG wire at both ends (Lead Wire A and B) on all models.
• Two Output Tiers: 2.6W/ft (up to 176 lm/ft, 32.8ft max run) for ambient and accent applications; 4.57W/ft (up to 434 lm/ft, 16.4ft max run) for higher-output architectural and commercial use.
• 90+ CRI, 36 LED Chips/ft: Chip Type 2835 delivers accurate color rendering across all five CCT options from 2400K to 4000K.
• 0.79" × 0.79" Square Profile: Compact, consistent cross-section for clean installation in compatible LINAIRE Flex mounting channels and spine channels.
• UL Listed 2108 — Outdoor / Wet Location: >50,000-hour rated life (TM-21 / LM-80). 5-Year Limited Warranty.

Power & Driver Sizing

All LINAIRE Flex 3D Bend models require a 24V DC Class 2 LED driver (sold separately). Formula: run length (ft) × W/ft ÷ 0.80 = minimum driver wattage.

• 2.6W/ft at 32.8ft max run: 32.8 × 2.6 ÷ 0.80 = 107W min — recommended ADPT-DRJ-192-24 (192W)
• 4.57W/ft at 16.4ft max run: 16.4 × 4.57 ÷ 0.80 = 94W min — recommended ADPT-DRJ-96-24 (96W)

Dimming is supported. Connect dimmer on the 24V DC output side of the driver — never on the AC line input.

Compatible Accessories — Sold Separately

• DI-LIN-3D-MTCH-39 — LINAIRE Flex Mounting Channel, 39 in.
• DI-LIN-3D-SPINE-39 — Mounting Spine Channel, 39 in. White
• DI-LIN-3D-MTCL-2 — LINAIRE Flex Mounting Clips
• DI-LIN-3D-DEC — End Cap for LINAIRE Flex 3D Bend

What's Included

• 1× LINAIRE Flex 3D Bend Linear Light Reel
• 96 in. White Bare Lead 18/2 AWG Wire — Lead Wire A (input end)
• 96 in. White Bare Lead 18/2 AWG Wire — Lead Wire B (tail end)

Required — Sold Separately

• 24V DC Class 2 LED Driver
• LED Dimmer — compatible with 24V DC driver
• Mounting Channel or Spine Channel (see compatible accessories above)